 Prime 1 Studio revealed a number of figures at Winter Wonder Festival 2019. They revealed Brachiosaurus from the 1/38 scale line, as will as Indominus Rex 1/15 scale figure, and Spinosaurus 1/15 scale figure. Brachiosaurus comes with a base like the other 1/38 scale figures, the 1/15 scale figures come with a diorama bases. All should be up for pre-order in the near future.  
2 Comments
 Prime 1 Studio teased new smaller scale 1/38 Scale T-rex and Triceratops statues a while back now they are available for pre-order. Both are scheduled for release between June and August 2019, check out the details and pics below. Prime 1 has also teased more dinos are on the way. Prime 1 Studio Collectible Figure Tyrannosaurus-Rex 1:38 Scale Prime 1 Studio takes pride in announcing the introduction of our new line Prime Collectibles Figure. PCFJP-01: Tyrannosaurus-Rex 1:38 Scale from Jurassic Park. Now fans have a new option of pocket-friendly and portable-friendly statue figures to collect. Tyrannosaurus-Rex is the largest carnivore living on Isla Nublar and, as such, grew into a fearless, bold, and domineering beast who walks the line between heroine and villainess. She is a female Tyrannosaurus, largely motivated by two goals: keep intruders off her territory and eat any pry she finds there. She is known for participating in several incidents and for saving the major human participants involved in these incidents from other dangerous creatures, although inadvertently. This makes her role something of an anti-hero in the films. There is more variety of dinosaurs joining to this series, soon. Prime 1 Studio fans, don't miss your chance to collect our new 1:38 scale Jurassic Park series!! Specifications: Size approximately 7.2 inches tall [(H):18.2cm (W):24.9cm (D):15.8cm] One Jurassic park design base Price: $69.00 Release date: June to Aug 2019 Order here. Prime 1 Studio Collectible Figure Triceratops 1:38 Scale Prime 1 Studio takes pride in announcing the introduction of our new line Prime Collectibles Figure. PCFJP-02: Triceratops 1:38 Scale from Jurassic Park. Now fans have a new option of pocket-friendly and portable-friendly statue figures to collect. Triceratops was a very common dinosaur which lived at the very end of the Cretaceous period. It had a huge frilled head with horns over each eye that could reach over 4 feet long. Triceratops had a third, smaller horn on its nose. These would be fearsome weapons against a predator. There is more variety of dinosaurs joining to this series, soon. Prime 1 Studio fans, don't miss your chance to collect our new 1:38 scale Jurassic Park series!! Specifications: Size approximately 4.2 inches tall [(H):10.7cm (W):24.4cm (D):9cm] Max width:24.7cｍ One (1) Jurassic park design base Price: $69.00 Release date: June to Aug 2019 Order here.
 
 
   Prime 1 Studio has announced the Legacy Museum Collection Jurassic Park Triceratops EX Version 1/15 Scale Statue, check out the details below. Of note there should be a regular version without the bonus item and limited number, we will update with that info as soon as we have it. “She was my favorite when I was a kid. Now I see her, she’s the most beautiful thing I ever saw.” – Alan Grant Prime 1 Studio is proud to present 1/15 Scale LMCJP-02: Triceratops from Jurassic Park (Film 1993). Jurassic Park directed by Steven Spielberg, it is based on the 1990 novel of the same name by Michael Crichton. The film is set on the fictional island of Isla Nublar, located off Central America’s Pacific Coast near Costa Rica, where billionaire philanthropist John Hammond and a small team of genetic scientists have created a wildlife park of cloned dinosaurs. Triceratops was a very common dinosaur which lived at the very end of the Cretaceous period. It had a huge frilled head with horns over each eye that could reach over 4 feet long. Triceratops had a third, smaller horn on its nose. These would be fearsome weapons against a predator. Product Specifications: Dedicated base included Booth sign miniature comes with EX version 1/15 Scale Polystone (Resin) Size: H: 31.6 cm W: 60 cm D: 26.6 cm H: 20 cm W: 11.6 cm D: 7.8 cm (Booth sign miniature) Price EX Version: $599 (Limited To 500) Price Regular Version: ? Release date: Dec 2019 - Feb 2020 
  The list of Jurassic Park dinosaurs coming from Prime 1 Studio continues to grow, while some we know about others are new. Prime 1 is releasing at least two raptors statues (attack version and a regular standing version) and a triceratops statue as part of their larger scale line (1/6 scale). Prime 1 is also releasing a T-rex and Triceratops in a 1/38 scale (toy size), it is not clear at this point if the smaller scale ones will have diorama style base like the larger ones. No word yet on full reveals or release dates but the large scale Triceratops will probably be the first one of the group release (since it was reveal at Summer Wonder Festival), more info as we get it.      Prime 1 Studio is releasing the Legacy Museum Collection Jurassic World: Fallen Kingdom Indoraptor 1/6 Scale Statue, it comes in two versions deluxe (EX) limited to 500 and regular version. Check out the pics and details below. Description “The perfect weapon for the modern age!” – Gunnar Eversol Prime 1 Studio is proud to present 1/6 scale LMCJW2-03: Indoraptor from Jurassic World: Fallen Kingdom. The Indoraptor is the secondary antagonist of the 2018 science fiction adventure film, Jurassic World: Fallen Kingdom, the fifth installment of the Jurassic Park film franchise, as well as the second installment of the Jurassic World trilogy. He was a new hybrid dinosaur genetically created by the scientist Henry Wu (on the orders of Eli Mills) in secret within the laboratory of Lockwood Manor as a successor to Blue and the Indominus rex that broke loose and went on a rampage across the site of the Jurassic World theme park on the island of Isla Nublar three years prior to the events of Jurassic World: Fallen Kingdom. Similar to our previous product LMCJW2-01: Blue, fans can expect the product to be the most screen accurate you will ever find. This 1/6 scale Indoraptor statue measures approximately 19 inches tall with 40 inches wide and based from the ending scene of the film. This is a must-have statue for all Jurassic World Fans! Specifications:
Indoraptor EX Version Limited Edition 500 Price: $849.00 Indoraptor Regular Version Price: $799.00 Est. Arrival: Nov. 2019 - Jan. 2020 Pre-ordered here from Prime 1 Studio (US)  
 
  Prime 1 Studio has officially announced their Jurassic Park T-Rex statue, which was revealed at Summer Wonder Festival. Check out the official pics and info below. Legacy Museum Collection Jurassic Park Tyrannosaurus Rex EX Version 1/15 “Somewhere on this island is the greatest predator that ever lived.” – Roland Tembo Prime 1 Studio is proud to present 1/15 Scale LMCJP-01: Tyrannosaurus-Rex from Jurassic Park (Film 1993). Jurassic Park directed by Steven Spielberg, it is based on the 1990 novel of the same name by Michael Crichton. The film is set on the fictional island of Isla Nublar, located off Central America’s Pacific Coast near Costa Rica, where billionaire philanthropist John Hammond and a small team of genetic scientists have created a wildlife park of cloned dinosaurs. Tyrannosaurus Rex is the largest carnivore living on Isla Nublar and, as such, grew into a fearless, bold, and domineering beast who walks the line between heroine and villainess. T-Rex nicknamed is Roberta but most fans call her Rexy/Rexie. She is a female Tyrannosaurus, largely motivated by two goals: keep intruders off her territory and eat any pry she finds there. She is known for participating in several incidents and for saving the major human participants involved in these incidents from other dangerous creatures, although inadvertently. This makes her role something of an anti-hero in the films. Based on the iconic scene from Jurassic Park, we are thrilled to let all our fans know the artists behind this project. Julien Romeo is the main modelers for the Jurassic Park: Origins. With him mainly sculpts this project with the help of Steve Jubinville which both have worked for ILM. Fans can expect this product to be the most movie accurate as possible. This is a must-have for all Rexy fans from Jurassic Park franchises. Specifications: Size approximately 17 inches tall for Tyrannosaurus-Rex [(H)42.5cm (W)84.2cm (D)38.7cm] Size approximately 5 inches tall for Tyrannosaurus-Rex dinner Goat [(H)12.9cm (W)14.2cm (D)8.0cm] One (1) The Goat statue (For Exclusive version only) Price $849.00 Release date Oct - Dec 2019 Material Polystone A non deluxe version should be available without the Goat, more info as we get it. Click here to pre-order. 
 
  Prime 1 Studio revealed three new Jurassic Park/World statues a Summer Wonder Festival 2018, Triceratops, T-rex, and the Indoraptor. The statues are similar to the Blue statue they have already put up for pre-order, featuring a base. The Triceratops and T-rex are from Jurassic Park with the Indoraptor from the recent release Jurassic World: Fallen Kingdom. No word on release date or price yet more info as we get it.            Prime 1 Studio has officially announced their Legacy Museum Collection Jurassic World: Fallen Kingdom Baby Blue Life-Size Statue, which was teased when they announced their first Jurassic World Statue. This is a 1:1 scale statue made direct from the the digital files used in the film. Check out all the details below. Descriptions: "Here I am with Blue. She’s displaying interest, concern… she’s remarkable.” – Owen Grady Prime 1 Studio is proud to present Life-Size LMCJW2-02: Baby Blue from Jurassic World: Fallen Kingdom. Baby Blue is a female Velociraptor that appears in Jurassic World (2015) and Jurassic World: Fallen Kingdom. She was created with the DNA of the Black-throated monitor lizard, which allowed her scales to reflect an iridescent blue color, giving her the distinctive pattern that she was named after. Out of all the raptors that were to be created following her birth, she was the largest. When she was born, Owen Grady imprinted on her, which allowed him to train her. Baby Blue was made by using exactly the same digital files from the movie which fans can expect the product to be the most movie accurate. The Life-Size Baby Blue statue measures approximately 27 inches tall and 24 inches width made of Vinyl and Polystone. This is a must have for all Jurassic Worlds franchises fans. Specifications: Size approximately 27 inches tall [(H)68.9cm (W)61.2cm (D)82.4cm] Retail Price: $899 US (Payment plans available) Edition Size: TBD Estimate shipment: Q3 2019 Material: Vinyl, Polystone Prototype samples shown Product details could be subjected to change without further notice Pre-order from Prime 1 Studio here.  
     Descriptions ""Hey, Blue! You know me. Come with me. You know you can't stay here."" – Owen Grady Prime 1 Studio is proud to present 1/6 Scale LMCJW2-01: Blue from Jurassic World: Fallen Kingdom (Legacy Museum Collection). Blue is a female Velociraptor that appears in Jurassic World (2015) and Jurassic World: Fallen Kingdom. She is known to be stubborn but is quite loyal to Owen Grady. She is more intelligent and cunning than the other raptors made for Jurassic World. With Blue still alive, she and many other dinosaurs will now face an impending danger, in the form of an erupting volcano. Which Owen and Claire mount a campaign to rescue the remaining dinosaurs from this extinction-level event. Jurassic World: Fallen Kingdom is a 2018 American Science Fiction Adventure film and the sequel to Jurassic World film releasing this Friday, June 22, 2018. The artist behind this project was Steve Jubinville, modeling Lead/Asset Supervisor of Industrial Light & Magic for Jurassic World franchises. Fans can expect the product to be the most movie accurate you will ever find. This 1/6 Scale Blue statue measures approximately 16 inches tall and 26 inches width and based from one of the iconic scenes. This is a must have for all Jurassic Worlds franchises fans. Specifications: Size approximately 16 inches tall [(H)41.5cm (W)65.2cm (D)45.5cm] Size approximately 4 inches tall [(H)11.2cm (W)16.0cm (D)11.8cm] (For Exclusive version only) One (1) Antique Gold 1/6 Baby Blue statue (For Exclusive version only) Price: Exclusive Version $749, Regular Version $699 Order link: https://www.prime1studio.com/jw2-blue-lmcjw2-01ex.html (More images below) Also coming from Prime 1 Studio will be the 1/6 Scale Indoraptor (to be fully revealed at Summer Wonder Festival July 29, 2018), and Life Size Baby Blue (info coming soon). Also there is a contest to win the Blue Statue (below, including contest details).    JURASSIC WORLD: FALLEN KINGDOM – BLUE 1/6 SCALE STATUE GIVEAWAY! Introducing our first Legacy Museum Collection Jurassic World franchises. We’re giving away Two (2) Blue 1/6 Scale statue from Jurassic World: Fallen Kingdom. Here’s how to Enter the Giveaway Contest**: 1. LIKE this post 2. COMMENT on the post below 3. SHARE this post on your Timeline 4. LIKE & FOLLOW our Facebook page 5. REGISTER an account to our website (https://www.prime1studio.com/customer/account/login/) Two (2) randomly drawn lucky winners will be selected to receive these prizes. Deadline to enter is 11:00 PM JST August 31, 2018 and selected on September 7, 2018. The winners of the giveaway contest will be announced here and contacted via e-mail for further instructions. **Conditions - Giveaway contest open to all participants worldwide - All winners agree to pay shipping charges on any prizes granted by Prime 1 Studio during any contest or giveaway unless otherwise specified in the contest description. - Winners will receive their prizes once LMCJW2-01EX: BLUE production has been completed and ready to be ship.  
  Prime 1 Studio has announced that they have acquired the license for Jurassic Park and Jurassic World, while no specific products were announce Prime 1 has made some awesome statues in the past like the Kong: Skull Island statue. Check out their press release below.
"Prime 1 Studio is excited to announce officially our next upcoming license Jurassic Park and World franchises. We are even more thrilled to let all our fans know the artists behind these projects, Steve Jubinville and Julien Romeo. Steve is the Modeling Lead/ Asset Supervisor for ILM for Jurassic World franchises. He is our main sculpt artist working on all our projects so far. Julien also works for ILM and he is the main modelers for the Jurassic Park: Origins. We can expect the products to be the most movie accurate from the Jurassic franchises from theses guys. This incredible opportunity gives Steve the chance to open his own company Dark Moon Studio VFX to offer you the best Jurassic Park models ever been done since Stan Winston Studio. This will be the most anticipated collection for all Jurassic Park/World fans." |
 We proudly support kaiju collectibles from these companies, and many more.
Archives
February 2019
Categories
All
 |
RSS Feed