​X-Plus is a Japanese toy company that makes toys based on many Japanese as well international characters. They make one of the largest lines of kaiju vinyl figures. X-Plus has their 30cm Series (30cm scale), Large Monster Series (25cm scale), Gigantic Series, and their Real Master Collection (poly resin "statues"). There are usually two version of many figures, a standard version, and a Ric Boy Limited version that is sold direct from X-Plus and features extra features and/or accessories. This section features all figures from the Toho 30cm Series beginning 2018. ​Thanks to John from Kaiju Addicts for some reference material.
Note: some figures released from 2018 forward may be in Part 1 if it is the same basic figure with updated paint, features, or accessories, also some newer figures are being released through the X-Plus North American website but are the same figure..

​Toho 30cm Series Yuji Sakai Godzilla '54 Monster King​/Godzilla Store Limited Reprint Suit Colored Version/Kits

​This figure was released Feb 2018, it stands 28cm tall. The Ric version features light up fins. This figure is based on a poster for the film. This figure is being re-released as the Godzilla Store Limited Reprint Suit Colored Version, it features a slightly different paint scheme (no light up fins), it is a Godzilla Store exclusive to be released April 2022. This was release as two kits, one from the Godzilla Store in black and clear vinyl, and one at Summer Wonder Festival 2023 in a brown and clear vinyl, this one was limited to 100 at the show and 100 sold afterwards.

​Toho 30cm Series Godzilla Earth

​This figure was released May 2018, it stands 32cm tall. The standard features the normal grey/green coloring, the Ric (above) features ​an orange "sunset" paint scheme.

​​Toho 30cm Series Kiryu 2002 Heavy Armor Nighttime Version

​This figure was released June 2018, it stands 32cm tall. It features a new nighttime paint scheme, light up eyes, and a mini Akane Yashiro figure. This is a Ric/Bandai Premium/Godzilla Store exclusive.

​Toho 30cm Series Mogera 1994

​This figure was released June 2018, it stands 30cm tall. The Ric version includes light up eyes and chest maser.

Toho 30cm Series Favorite Sculptors Line Godzilla 1962

This figure was released July 2018, it stands 28cm tall. The Ric version features a light up gimmick and nameplate.

​Toho 30cm Series Yuji Sakai Modeling Collection Shin Godzilla/Wonder Festival Kits/Luminous Version/​Ortho Version

​This figure was released August 2018, it stands 29cm tall. The Ric version features a clear vinyl with silver paint behind it to highlight the red parts of Shin's body. This figure was released as two kits at Winter Wonder Festival 2019 (Feb 2019), one clear vinyl, one red vinyl. The clear was at the Yuji Sakai booth, the red at the X-Plus booth. This figure will be released Oct 2024 as the Luminous Version, it features lights throughout the body shining through clear red vinyl with paint apps. This figure will be released as the Ortho Version (Orthochromatic), two versions will be available, Godzilla Store version with light up feature similar to the luminous Version but it is molded in clear vinyl with paint apps, a standard version without the light up feature from general retailers, release is Oct 2024. 

​Toho 30cm Series Jet Jaguar

This figure was released August 2018, it stands 31cm tall. The Ric version has two sets of arms, and a light up gimmick for the eyes.

​Toho 30cm Series Favorite Sculptors Line Varan

This figure was released Oct 2018, it ​stands 18cm tall and is 41cm in length. This figure based on a kit by Atsushi Asai released in 2007, the Ric version comes with a Mountain God figure standing 16cm tall.

​Toho 30cm Series Fire Rodan

This figure was released Nov 2018, it's 29cm in length and has a 47cm wingspan and can with a stand for display. This is a Ric exclusive figure.

​Toho 30cm Series Yuji Sakai Modeling Collection Godzilla 1989 Osaka Landing Version (Closed Mouth)

This figure was released Dec 2018, it stands 28cm tall. The Ric version featured light-up fins and a mini Super X. Note: This is the same figure as previously released (Sept 2014) with a different head (mouth).

​Toho 30cm Series Godzilla 1967

This figure was released Dec 2018, it stands 33cm tall. The Ric version comes with two Minyas newborn and child versions, newborn stands 12cm, and Minya child stands 18cm, both released previously (2010), as well as a second set of arms to offer different pose options.

​​Toho 30cm Series Favorite Sculptors Line Godzilla 1964/RMC +

​This figure was released Jan 2019, it stands 31cm tall and is 35cm in length. The Ric version comes with light up fins. This is based on an ​Inoue Arts kit released in 1986. This figure is being released as a Real Master Collection resin figure Oct 2022, it comes with a battery base and has light up fins.

Toho 30cm Series Ebirah

​This figure was released Jan 2019, it is 34cm in length. The Ric version comes with a sea base that replaces his tail.

Toho 30cm Series Yuji Sakai Modeling Collection Godzilla 2002 Battle In Arashi/Godzilla Store Kit

​​This figure was released April/May 2019, it is 28cm in length. The Ric version comes with light up fins. This figure is being released as a kit from the Godzilla Store Sept 2022, it features black and clear parts. Check out the Kaiju Addicts review here.

​Toho 30cm Series Winter Wonder Festival 2019 Hibiya Godzilla Square Exclusive Statue/5th Anniversary Red Clear Version

This figure was sold at Winter Wonder Festival 2019 (Feb 2019) in the Godzilla Store booth, it stands 30cm tall and came with a base (35cm tall with base) and is 47.5cm in length. This figure will be re-release as the Godzilla Store Exclusive 5th Anniversary Red Clear Version, featuring clear red vinyl. it will be released May/June 2023.

Toho 30cm Series ​Yuji Sakai Burning Godzilla Hong Kong Landing Version/Kits

​​This figure was released August 2019, it stands 30cm tall and 51cm in length. The regular version is solid color vinyl with painted highlights, the Ric version is painted clear orange vinyl. This figure is based on a kit sold at Winter Wonder Festival 2016. This figure was released at Winter Wonder Festival Feb 2020 as a kit in clear yellow vinyl (below) it was limited to 100 pieces and was sold via lottery after the event. This figure was released by the Godzilla Store as a kit in clear orange vinyl (below), it featured the same John Ruffin designed box as the yellow version with a different version "sticker". The orange kit was released again for Godzilla Day with this release Feb 2024.

Toho 30cm Series Favorite Sculptors Line Godzilla 1962

​​This figure was released August 2019, it stands 32cm tall. This ​figure is based on a Inoue Arts kit released in 2004, it comes with a base and support. This is a Ric exclusive.

Toho 30cm Series Favorite Sculptors Line Mogera 1957

​​This figure will be released Jan 2020, it stands 25cm tall. This figure ​is based on a Asai Zokei kit, it comes with a Mysterian ship that's 7cm in size, and features light up eyes. This is a Ric exclusive.

Toho 30cm Series ​Yuji Sakai Modeling Collection Godzilla 1984 Shinjuku Subcenter Battle Version/Godzilla Store/Kit

​​This figure was released Feb 2020, it stands 29cm tall and is 48cm in length. The Ric version features light up fins. This figure will be re-released as a Godzilla Store exclusive set with Super X (possible updated paint as well) Nov 2022. Super X is 8cm in length and comes with a stand. It was release again as a Soft Vinyl Assembly Kit for Winter Wonder Festival in Feb 2024, it featured black vinyl with clear fins, and it was limited to 100 at the event and 100 afterwards.

Toho 30cm Series Godzilla 1993/​Luminescence Version

​​This figure will be released July 2020, it stands 30cm tall. The Ric version features a gold glitter paint scheme that is design to reflect when Rodan restructures him. This figure will be re-released Jan 2023 as the Luminescence Version Ric exclusive, it features an updated paint scheme and light up fins.

​Toho 30cm Series Favorite Sculptors Line Rodan 1956

This figure will be released Jan 2021, it stands 36cm tall (with base), and has a 50cm wingspan. This figure ​is based on a Asai Zokei kit, the Ric has a logo volcano base, standard has a "branded" base.

Toho 30cm Series Megalon

​​This figure will be released Jan 2021, it stands 32cm tall. The Ric version comes with a mini flying Jet Jaguar that is 10cm long.

​RMC + Toho 30cm Series Favorite Sculptors Line Godzilla 1962

​This figure will be released June 2021, it stands 32cm tall (with base) and is 47cm in length. This is a Ric only figure and features a light up gimmick and battery pedestal logo based.

​Real Master Collection Godzilla 2000 Millennium Maquette Replica/Godzilla Store Limited

This figure will be released Oct 2021, it stands 30cm/28.5cm tall and is 63cm/62cm in length. There are three versions of this Yuji Sakai designed figure ​resin (limited to 500, above), Soft Vinyl version (above), and Godzilla Store Limited Soft Vinyl  Metallic Red Version (below). The resin features a base with the movie name and logo, and plate with serial number, and the vinyl and Godzilla Store versions do not come with the base. Note the size differences above (resin vs. vinyl) is due to vinyl shrinkage (vinyl being slightly smaller). 

​Toho 30cm Series Yuji Sakai Modeling Collection Godzilla 1991 Abashiri Fierce Fight/​Godzilla Store Limited

This figure will be released Nov 2021, it stands 29cm tall and is 46cm in length. There are three versions of this figure ​standard (above left and right), Ric light up (above center), and Godzilla Store Limited Heat Ray Radiation Version (below). The Ric fins light up and the Godzilla Store version features blue and white painted fins.

​Toho 30cm Series Godzilla The Ride Godzilla Store Limited Edition

This figure will be released June 2022, it stands 31cm tall and is 60cm in length. There are three versions of this figure ​standard, and Godzilla Store Limited Edition. The Godzilla Store version features blue heat ray colored fins.

Toho 30cm Series Favorite Sculptors Line Great Battle of the South Sea Godzilla Vs. Ebirah Set

This set will be released August 2022, it stands 48cm tall. It includes a base and stand to support Ebirah, and is based on a ​Asai Zoukei kit, it is a Ric exclusive.

​Toho 30cm Series Favorite Sculptors Line Flying Hedorah Special Set

​This set will be released October 2022, these figures are based on a Resin Chef kit, the Ric includes Flying version, Water version, and Tadpole version the standard is just the flying version. The flying version is 38cm long, 27cm wide, 9cm tall without base, and 23cm tall with base (and stand) and features an damaged eye patch, the water version is 5cm tall, 14cm wide, and 22cm long, the tadpole (in dish) is 1.6cm tall, 4cm wide and 6cm deep (note these maybe the measurements of the figure not the dish).

Toho 30cm Series Favorite Sculptors Line Mechagodzilla 1974

​This figure will be released Jan 2023, it stands 32cm tall. This is a Monster Maker 28 sculpt, the Ric features light up eyes (space beam) and chest weapon.

Real Master Collection Plus Favorite Sculptors Line Destoroyah

(Note this is not technically in the 30cm line) ​This figure will be released June 2023, it stands 64cm tall, is 75cm wide, and 63cm deep. This is based on a kit by Kokuryu Koubou/Black Dragon Studios, it features light up eyes and horn. This is a Ric/Godzilla Store exclusive.

​Toho 30cm Series Godzilla 1968 & Minira 1968 Kaiju Total Advance 55th Anniversary Set

These figures will be released August 2023, Godzilla stands 33cm tall, Minya 18cm tall. This is a Godzilla Store exclusive of figures released in 2010 with these being the standard versions from then (possibly with updated paint schemes).

Toho 30cm Series Yuji Sakai Modeling Collection Shin Godzilla 4th Form Awakening Version/Godzilla Store Version

​This figure will be released Dec 2023, it stands 34cm tall (to tail), 32cm deep, and 23cm wide. It is based on a kit by Yuji Sakai, the Ric features light up fins and mouth, with the tail lighting up to the tip, the Godzilla Store version (below) features clear vinyl with silver paint inside to reflect light (the standard has neither feature).

Toho 30cm Series Favorite Sculptors Line Godzilla 1974

​This figure will be released Oct 2023, it stands 31cm tall and is 32cm in length. This is a Monster Maker 28 sculpt, the Ric features light up fins.

Real Master Collection Plus Favorite Sculptors Line Destoroyah ​Aggregate

(Note this is not technically in the 30cm line) ​This figure will be released Oct 2023, it stands 34cm tall, it is 35cm wide, and is 56 cm in length. This is based on a kit by Kokuryu Koubou/Black Dragon Studios, it features a base. This is a Ric/Godzilla Store exclusive.

​Super Toho 30cm Series Godzilla 1999

This figure is based on 3D scans of the actual suit, will be released Dec 2023, it stands 30cm tall, and is 40cm in length. This is a Ric exclusive.

Toho 30cm Series Real Master Collection Favorite Sculptors Line Godzilla 1995

This figure will be released Feb 2024, it stands 37cm tall, is 32cm wide, and is 60cm in length. It is based on a Kokuryu Kobo sculpt, and this is a Ric only figure and features a light up gimmick (burning patches, and fins).

​Toho 30cm Series Yuji Sakai Modeling Collection Godzilla 1993 Brave Figure In The Suzuka Mountains/Godzilla Store

This figure will be released May/June 2024, it stands 35cm tall, is 35cm in length. There are three versions Ric, standard, and Godzilla Store, the Ric version features light up fins (blue) and the Godzilla Store features clear blue fins.

​Toho 30cm Series Favorite Sculptors Line Godzilla 1984 Cybot Version

This figure will be released April 2024, it stands 34cm tall, is 38cm in length. It is based on a Monster Maker 28 sculpt, and the Ric version comes with Shockirus with harpoon which is 18cm in length (this is the same sculpt as the Ric accessory from 2013).

Toho 30cm Series Godzilla 2023 (Minus One)

This figure will be released June 2024, it stands 33cm tall, is 53cm in length. The Ric version features a different paint scheme with clear blue fins. 

​Toho 30cm Series Favorite Sculptors Line Baragon 1965

This figure will be released July 2024, it stands 17cm tall, is 42cm in length. This is based on a kit by Inoue Arts, the Ric version features a light up horn. 

Toho 30cm Series Bagan 

Based on the video game character this figure will be released Jan 2025, it stands 35cm tall and is 56cm in length. It is a Ric exclusive.

Toho 30cm Series 50th Anniversary Gigan

This figure will be released Jan 2025, it stands 30cm tall. It is based on the suit created by the Gigan 50th Anniversary Gigan Suit Activation Project (crowdfunding project), and was a reward for the same project.

​Toho 30cm Series Yuji Sakai Modeling Collection Godzilla 1995 Last Scene

This figure will be released May/June 2025, it stands 31cm tall, and is 44cm in length. There are three versions Ric, Godzilla Store, and standard, the Godzilla Store features burning patches (translucent vinyl), the Ric features light up fins, and the standard is the same as the Ric without the light up. 

Toho 30cm Series Favorite Sculptors Line Godzilla 2016 Heat Ray Radiation Version

This figure will be released July 2025, it stands 28cm tall to the top of the head and 60cm to the tip of the tail. This is based on a kit by Kokuryu Kobo (Black Dragon Studios), it features clear vinyl, and is a Godzilla The Art exclusive figure.

Star Ace

​Kong: Skull Island Version 1.0 Vinyl Statue/Kit

​​This figure is designed and made by X-Plus, was released approx Aug/Sept 2018, and it stands 32cm tall for the standard (approx 12.5 inches) the deluxe is 34cm tall (with the base, almost 14 inches). The deluxe adds a base, damaged helicopter, and a closed left hand that can hold the helicopter, the standard has open left hand (note there is only one hand per version). The deluxe is limited to 800. Both versions are being released internationally. This figure is being released as a kit (unpainted and unassembled, no base or helicopter), it is scheduled for a Oct 2021 release. Check out the Kaiju Addicts review here.

​​Kong: Skull Island Version 2.0 Vinyl Statue

​​This figure is designed and made by X-Plus and features a different pose from the previous version, it will be released approx Dec 2019, and it stands 32cm tall for the standard (approx 12.5 inches) the deluxe is 34cm tall (with the base, almost 14 inches). The deluxe adds a base with boat, a propeller with chain (update: the standard featured the propellor as well). It is unclear is the deluxe will be limited like the first version. Both standard and deluxe versions are being released internationally.

​Kong Vs. Skullcrawler Super Vinyl Set/Figure

The limited-edition Deluxe set comes with both Kong and the Skullcrawler or the Skullcrawler can be purchased separately. This monster bash is coming Dec 2020.
Three versions will be available Kong with base & Skull Crawler with base, Kong without base & Skull Crawler with base, Skull Crawl with base. Kong is the same size as the previously released version, the Skullcrawler is approx 35cm tall, 15cm wide, and 35cm in length (note height maybe with base, length maybe Skullcrawler's body). The Skullcrawler is made of resin and vinyl.

Kong 2024 With B.E.A.S.T. Glove Vinyl Statue

Standing a commanding 30cm tall, this meticulously crafted figure captures Kong in all his glory as seen in the highly anticipated film. With intricate detailing and vibrant colors, every aspect of his fierce expression and muscular physique is brought to life, making it a stunning addition to any collection. ​For collectors seeking the ultimate experience, the deluxe version of this statue features Kong donning the B.E.A.S.T. (Bio Enhanced Anatomech Seismic Thunder) glove, showcasing his readiness for battle and adding an extra layer of excitement to this already impressive figure. The glove enhances Kong’s iconic look, emphasizing his strength and resilience in the face of colossal adversaries. It will be released Q1 2025.

Mothra 2024 Vinyl Statue

32cm tall with a 47cm wingspan, Mothra gracefully hovers atop an intricately designed pyramid base, bringing a touch of movie-real magic to your display. The deluxe version of this piece features glowing eyes and a glowing base, creating a mesmerizing visual effect that truly brings this iconic character to life. It will be released Q2 2025. (Note the sculpt was updated after announcement.)

Mechagodzilla 2021 Vinyl Statue

Standing an impressive 30 cm tall, this meticulously crafted collectible captures the mechanical marvel in all its glory, showcasing intricate details and a dynamic pose that fans of the franchise will adore. The statue features high-quality soft vinyl construction, ensuring durability and a striking finish that brings Mechagodzilla to life. With its fierce expression and expertly painted metallic accents, this piece is a must-have for any serious collector or Godzilla aficionado. But that’s not all! The deluxe version of this statue takes your display to the next level with an eye-catching light-up feature, and posable tail. Illuminate your collection and watch as Mechagodzilla’s menacing glow enhances its imposing presence, creating a captivating focal point in any room. It will be released Q2 2025.