 Chronicle Collectibles Jurassic Park Dilophosaurus Statue "Uh, nice boy. Nice dinosaur. I thought you were one of your big brothers, you're not so bad..." On the storm-wracked island of Isla Nublar, with a pocket full of dinosaurs and greed in his heart, Dennis Nedry made one wrong turn too many. Nedry fancied himself a man of numbers. His entire existence revolved around the manipulation of code to achieve a desired result. He wasn’t especially good at it. All the same, his eyes remained fixed on a computer screen, and he had little time to see the world around him, much less respect it. Numbers, it seems, were the only thing he appreciated. All the more so when those numbers had dollar signs attached. Which is how Nedry found himself at the bottom of a ravine in the middle of a storm, his Jeep stuck on a fallen branch, his glasses lost, stumbling blinding through water and mud and face-to-face with a deadly Dilophosaurus. The Dilophosaurus in Jurassic Park is a four-feet-tall product of creative license that has the honor of being the only creature in the franchise to be rendered entirely with practical effects. The renowned wizards at Stan Winston Studios embraced the task presented to them, and delivered to the screen a creature capable of going from oddly cute to flat-out horrifying in an instant. Even before its neck expanded and that toxic venom flew through the air, audiences knew that Nedry’s day was done. The artisans at Chronicle Collectibles pay homage to the work of those effects masters with their Jurassic Park 1/4-scale Dilophosaurus Statue. The creature’s curious expression is fully realized in one of the two heads included with the piece, which can be readily switched to the other to capture that signature look with the extended frills and screaming mouth. The Dilophosaurus Statue is limited to 300 pieces, with the first 100 sold including a Chronicle Collectibles exclusive — a Barbasol cryo-can in 1/4 scale. Product Details:
         
0 Comments
 Chronicle Collectibles has announced The Lost World: Jurassic Park Parasaurolophus Statue, the first ever licensed from the film. Check out the details below and Pics. The Lost World: Jurassic Park Parasaurolophus Statue The strange looking Parasaurolophus is definitely one of our favorites at Chronicle and now we’re ready to bring this unique dino home for fans. Presenting the world’s first licensed Parasaurolophus statue from The Lost World: Jurassic Park, created from an original Stan Winston Studios casting! The pre-order fun begins tomorrow at 3pm CDT (8pm UTC) at chroniclecollectibles.com! This next release in our line of cinema-quality maquettes honors the work of master FX artisan Stan Winston and his immeasurable contributions to the Jurassic Park franchise. With its tan body and reddish brown highlights on its back and face, this duck-billed dinosaur stands atop a sandy base reminiscent of the grounds of Isla Sorna where Roland Tembo pursued the Parasaurolophus herd. Individually numbered and measuring a sizeable 21” tall by 33” long, this dinosaur is destined to make a fantastic addition to your growing Jurassic Park and Jurassic World collection from Chronicle Collectibles! Details: • World’s First Officially Licensed Parasaurolophus Statue from The Lost World: Jurassic Park • Limited Edition • Crafted in Polyresin • Diorama base with The Lost World: Jurassic Park logo medallion • Approx. 21" tall, 33” long, and 11” wide • Estimated to Ship Q2 2020 • Priced at just $499 (and eligible for our no-interest payment plans) It's about time the Parasaurolophus received some high-end collectible love, and we're so proud to bring you this gorgeous piece starting at 3pm CDT tomorrow! 
 Prime 1 Studio revealed a number of figures at Winter Wonder Festival 2019. They revealed Brachiosaurus from the 1/38 scale line, as will as Indominus Rex 1/15 scale figure, and Spinosaurus 1/15 scale figure. Brachiosaurus comes with a base like the other 1/38 scale figures, the 1/15 scale figures come with a diorama bases. All should be up for pre-order in the near future.    Iron Studios has announced another awesome statue, the John Hammond Art Scale 1/10 Statue. The statue is basically the same pose as the one with The Welcome To Jurassic Park statue we posted yesterday just larger. Check out the details below. Based on Michael Crichton's Jurassic Park book, Steven Spielberg's Universal Pictures film that kicked off the film franchise, was a landmark in theaters in 1993, winner in three categories at the 66th Oscars. The story features a theme park inhabited by extinct dinosaurs 65 million years ago, cloned from their DNA extracted from insects preserved in prehistoric amber. Created by John Hammond, an eccentric billionaire, the park located on an island near Costa Rica called Nublar, is analyzed by Hammond to win approval from a select group of experts formed by palaeontologist Dr. Alan Grant, his paleobotan student Ellie Sattler , the mathematician Ian Malcolm and Donald Gennaro, a lawyer representing Hammond's investors. Accompanied by children Tim and Lex Murphy, Jurassic Park John Hammond Art Scale 1/10 Statue Limited edition Based on original references from the movie Made in Polystone Hand painted Includes base display John Hammond Art Scale 1/10 Product dimensions: 7.6 in (H) x 5.5 in (W) x 5.3 in (L) Product Weight: 0.8 lbs Release Schedule: Third quarter of 2019 Price: $99.99
    Iron Studios is releasing two Jurassic Park 1/20 Scale Demi Art Scale statues Welcome To Jurassic Park and Brachiosaurus. Both feature the same basic Brachiosaurus, while the Welcome To Jurassic Park adds Grant, Elie and Hammond, as seen in the classic scene from the film as well as a grass base with trees. Check out all the details below. One of the best known and tallest (over nine meters high) dinosaurs, Brachiosaurus in Jurassic Park was recreated by InGen in its complex on Sorna Island, where islanders served as their caretakers. This colossal cloned dinosaur had back legs strong enough to allow them to enter a tripod position during feeding. When they reached a certain age, they were transported to the neighboring island, Nublar Island, to be one of InGen's Jurassic Park attractions. It was the first dinosaur found by staff hired by InGen to assess the safety of Jurassic Park for visitors. Dr. Alan Grant and Dr. Ellie Sattler were the most "haunted" of the group because the Brachiosaurus was a land dweller, not semi-aquatic as they thought. Welcome to Jurassic Park Demi Art Scale 1/20 Diorama Welcome to Jurassic Park! 1/20th scale diorama Limited edition Based on original references from the movie Made in Polystone Hand painted Includes base with Brachiosaurus, Grant, Elie and Hammond Welcome to Jurassic Park Demi Art Scale 1/20 Product dimensions: 31,5 in (H) x 23,6 in (W) x 12,2 in (L) Product Weight: 25,3 lbs Release Schedule: Third quarter of 2019 MSRP $999.99 Brachiosaurus Demi Art Scale 1/20 Brachiosaurus Limited edition Based on original references from the movie Made in Polystone Hand painted Includes base display Brachiosaurus Demi Art Scale 1/20 Product dimensions: 30,7 in (H) x 15,7 in (W) x 11,8 in (L) Product Weight: 21 lbs Release Schedule: Third quarter of 2019 MSRP $599.99
 
   Prime 1 Studio teased new smaller scale 1/38 Scale T-rex and Triceratops statues a while back now they are available for pre-order. Both are scheduled for release between June and August 2019, check out the details and pics below. Prime 1 has also teased more dinos are on the way. Prime 1 Studio Collectible Figure Tyrannosaurus-Rex 1:38 Scale Prime 1 Studio takes pride in announcing the introduction of our new line Prime Collectibles Figure. PCFJP-01: Tyrannosaurus-Rex 1:38 Scale from Jurassic Park. Now fans have a new option of pocket-friendly and portable-friendly statue figures to collect. Tyrannosaurus-Rex is the largest carnivore living on Isla Nublar and, as such, grew into a fearless, bold, and domineering beast who walks the line between heroine and villainess. She is a female Tyrannosaurus, largely motivated by two goals: keep intruders off her territory and eat any pry she finds there. She is known for participating in several incidents and for saving the major human participants involved in these incidents from other dangerous creatures, although inadvertently. This makes her role something of an anti-hero in the films. There is more variety of dinosaurs joining to this series, soon. Prime 1 Studio fans, don't miss your chance to collect our new 1:38 scale Jurassic Park series!! Specifications: Size approximately 7.2 inches tall [(H):18.2cm (W):24.9cm (D):15.8cm] One Jurassic park design base Price: $69.00 Release date: June to Aug 2019 Order here. Prime 1 Studio Collectible Figure Triceratops 1:38 Scale Prime 1 Studio takes pride in announcing the introduction of our new line Prime Collectibles Figure. PCFJP-02: Triceratops 1:38 Scale from Jurassic Park. Now fans have a new option of pocket-friendly and portable-friendly statue figures to collect. Triceratops was a very common dinosaur which lived at the very end of the Cretaceous period. It had a huge frilled head with horns over each eye that could reach over 4 feet long. Triceratops had a third, smaller horn on its nose. These would be fearsome weapons against a predator. There is more variety of dinosaurs joining to this series, soon. Prime 1 Studio fans, don't miss your chance to collect our new 1:38 scale Jurassic Park series!! Specifications: Size approximately 4.2 inches tall [(H):10.7cm (W):24.4cm (D):9cm] Max width:24.7cｍ One (1) Jurassic park design base Price: $69.00 Release date: June to Aug 2019 Order here.
 
 
   Iron Studios is releasing three Jurassic Park Mini Co figures, two dinos and Ian Malcolm. These figures were released in Brazil previously and are now being released in the US. They are stylized plastic figures of a smaller scale than Iron Studios regular statues. Check out the detail for each below. Velociraptor SRP: $24.99 Collection: Minico Figures Product dimensions: 5” Height or 127mm x 130mm Characteristics: Creation - Iron Studios Concept - Chiaroscuro Studios and Marcio Hum Made in Plastic (PVC) Hand painting Includes base display Dimensions of the package: 200mm (A) x 210mm (L) x 200mm (P) Released: March 2019 Tyrannosaurus Rex SRP: $34.99 Collection: Minico Figures Ref.: MF0012 Product dimensions: 4.9” x 9” Height or 125mm x 240mm Characteristics: Creation - Iron Studios Concept - Chiaroscuro Studios and Marcio Hum Made in Plastic (PVC) Hand painting Includes base display Dimensions of the package: 200mm (A) x 290mm (L) x 240mm (P) Released: March 2019 Ian Malcolm SRP: $18.99 Collection: Minico Figures Product dimensions: 5,3” Height or 135mm x 75mm Characteristics: Creation - Iron Studios Concept - Chiaroscuro Studios and Marcio Hum Made in Plastic (PVC) Hand painting Includes base display Dimensions of the package: 200mm (A) x 115mm (L) x 95mm (P) Released: March 2019 
  
 
 Prime 1 Studio has announced the Legacy Museum Collection Jurassic Park Triceratops EX Version 1/15 Scale Statue, check out the details below. Of note there should be a regular version without the bonus item and limited number, we will update with that info as soon as we have it. “She was my favorite when I was a kid. Now I see her, she’s the most beautiful thing I ever saw.” – Alan Grant Prime 1 Studio is proud to present 1/15 Scale LMCJP-02: Triceratops from Jurassic Park (Film 1993). Jurassic Park directed by Steven Spielberg, it is based on the 1990 novel of the same name by Michael Crichton. The film is set on the fictional island of Isla Nublar, located off Central America’s Pacific Coast near Costa Rica, where billionaire philanthropist John Hammond and a small team of genetic scientists have created a wildlife park of cloned dinosaurs. Triceratops was a very common dinosaur which lived at the very end of the Cretaceous period. It had a huge frilled head with horns over each eye that could reach over 4 feet long. Triceratops had a third, smaller horn on its nose. These would be fearsome weapons against a predator. Product Specifications: Dedicated base included Booth sign miniature comes with EX version 1/15 Scale Polystone (Resin) Size: H: 31.6 cm W: 60 cm D: 26.6 cm H: 20 cm W: 11.6 cm D: 7.8 cm (Booth sign miniature) Price EX Version: $599 (Limited To 500) Price Regular Version: ? Release date: Dec 2019 - Feb 2020 
  The list of Jurassic Park dinosaurs coming from Prime 1 Studio continues to grow, while some we know about others are new. Prime 1 is releasing at least two raptors statues (attack version and a regular standing version) and a triceratops statue as part of their larger scale line (1/6 scale). Prime 1 is also releasing a T-rex and Triceratops in a 1/38 scale (toy size), it is not clear at this point if the smaller scale ones will have diorama style base like the larger ones. No word yet on full reveals or release dates but the large scale Triceratops will probably be the first one of the group release (since it was reveal at Summer Wonder Festival), more info as we get it.       JURASSIC PARK Rotunda Rex “When Dinosaurs Ruled the Earth.” In the original Jurassic Park, our final glimpse of the magic of the cloned dinosaurs is of the escaped Tyrannosaurus-Rex just having fended off the ferocious Velociraptors for our heroes. She bellows out an earth-shattering roar in the visitor center rotunda as a banner reading “WHEN DINOSAURS RULED THE EARTH” gently falls down in front of her. Without a doubt, the scene is one of the most memorable in cinematic history. Long-time fans of Chronicle Collectibles know we have wanted to do this particular piece ever since we started making Jurassic Park statues. After countless hours of research and design, we are finally ready to bring forth our new limited edition 1:9 scale T. rex in the Rotunda statue. Yes, you read that correctly, 1:9 SCALE! At approximately 24” tall by 22” in diameter, this is the LARGEST Tyrannosaurus-Rex on the market beyond our 1:5 full Tyrannosaurus-Rex. This also means that the T. rex in the Rotunda statue is in scale with our existing Owen & Blue offering. This magnificent piece presents T. rex with her mouth in a roaring pose as she stands defiantly atop a scene-specific circular base. Underneath her is a cutaway revealing dinosaur fossils buried underneath. The “WHEN DINOSAURS RULED THE EARTH” banner seemingly defies gravity as it drapes down below her. And sharp-eyed fans will be pleased to see that Rexy comes battle-damaged with wounds inflicted during the Velociraptor fight. With our 1:9 scale T. Rex in the Rotunda statue, we have brought CG glory to life and captured one of the greatest scenes in dinosaur film history! If you’re a Jurassic Park fan, you’ll deeply regret missing out on this 1:9 scale T. rex in the Rotunda statue once it’s sold out. So, indulge yourself today by using one of our interest-free payment plans to bring home the perfect Jurassic Park collectible! Product Details:
Jurassic Park, Jurassic World and all related marks and logos are trademarks and copyrights of Universal Studios and Amblin Entertainment Inc. Licensed by Universal Studios. All Rights Reserved.
 JURASSIC PARK Dr. Ian Malcolm “Yeah, but, John, if The Pirates of the Caribbean breaks down, the pirates don't eat the tourists.” When you’re choosing the ultimate pose for a definitive statue of Jurassic Park’s Dr. Ian Malcolm, there’s one iconic image of the film’s “rock star” that stands at the forefront. Of course, we’re talking about the shot where he’s lying down with his shirt unbuttoned while recovering from the T-Rex attack. Used in countless memes, this indelible image has been a fan favorite for years because it really captures the fun and sheer magnetism that actor Jeff Goldblum brings to this beloved character. We at Chronicle Collectibles are delighted to present the world’s first officially licensed, limited edition 1:4 scale Dr. Ian Malcolm statue! Whether you’re a fan of Jurassic Park or just Jeff Goldblum, this statue makes for the perfect collectible to display in your home, office, or Jeff Goldblum shrine. Just imagine what your friends, family, and co-workers will say when they see this large and imposing statue of Dr. Malcolm. You can bet there’s going to be some selfies with this one. Made to exacting detail to include the specks of blood on his chest and hand, this amazing 1:4 scale Dr. Ian Malcolm statue also features a scene-specific circular base with a cutaway revealing dinosaur fossils buried underneath. This base makes it the perfect companion to our 1:4 scale Dr. Alan Grant statue. There will never be another opportunity to own a statue of Dr. Malcolm as epic as this one! Since it’s a limited edition piece, be sure to get your pre-order in fast as this will surely sell out. And be sure to use our no-interest payment plans to make purchasing as easy as ever! Product Details:
Jurassic Park, Jurassic World and all related marks and logos are trademarks and copyrights of Universal Studios and Amblin Entertainment Inc. Licensed by Universal Studios. All Rights Reserved.
|
 We proudly support kaiju collectibles from these companies, and many more.
Archives
May 2019
Categories
All
  |
RSS Feed