- Published on
Chronicle Collectibles Jurassic Park Dilophosaurus Statue
"Uh, nice boy. Nice dinosaur. I thought you were one of your big brothers, you're not so bad..."
On the storm-wracked island of Isla Nublar, with a pocket full of dinosaurs and greed in his heart, Dennis Nedry made one wrong turn too many.
Nedry fancied himself a man of numbers. His entire existence revolved around the manipulation of code to achieve a desired result. He wasn’t especially good at it. All the same, his eyes remained fixed on a computer screen, and he had little time to see the world around him, much less respect it. Numbers, it seems, were the only thing he appreciated. All the more so when those numbers had dollar signs attached.
Which is how Nedry found himself at the bottom of a ravine in the middle of a storm, his Jeep stuck on a fallen branch, his glasses lost, stumbling blinding through water and mud and face-to-face with a deadly Dilophosaurus.
The Dilophosaurus in Jurassic Park is a four-feet-tall product of creative license that has the honor of being the only creature in the franchise to be rendered entirely with practical effects. The renowned wizards at Stan Winston Studios embraced the task presented to them, and delivered to the screen a creature capable of going from oddly cute to flat-out horrifying in an instant. Even before its neck expanded and that toxic venom flew through the air, audiences knew that Nedry’s day was done.
The artisans at Chronicle Collectibles pay homage to the work of those effects masters with their Jurassic Park 1/4-scale Dilophosaurus Statue. The creature’s curious expression is fully realized in one of the two heads included with the piece, which can be readily switched to the other to capture that signature look with the extended frills and screaming mouth. The Dilophosaurus Statue is limited to 300 pieces, with the first 100 sold including a Chronicle Collectibles exclusive — a Barbasol cryo-can in 1/4 scale.
Product Details:
"Uh, nice boy. Nice dinosaur. I thought you were one of your big brothers, you're not so bad..."
On the storm-wracked island of Isla Nublar, with a pocket full of dinosaurs and greed in his heart, Dennis Nedry made one wrong turn too many.
Nedry fancied himself a man of numbers. His entire existence revolved around the manipulation of code to achieve a desired result. He wasn’t especially good at it. All the same, his eyes remained fixed on a computer screen, and he had little time to see the world around him, much less respect it. Numbers, it seems, were the only thing he appreciated. All the more so when those numbers had dollar signs attached.
Which is how Nedry found himself at the bottom of a ravine in the middle of a storm, his Jeep stuck on a fallen branch, his glasses lost, stumbling blinding through water and mud and face-to-face with a deadly Dilophosaurus.
The Dilophosaurus in Jurassic Park is a four-feet-tall product of creative license that has the honor of being the only creature in the franchise to be rendered entirely with practical effects. The renowned wizards at Stan Winston Studios embraced the task presented to them, and delivered to the screen a creature capable of going from oddly cute to flat-out horrifying in an instant. Even before its neck expanded and that toxic venom flew through the air, audiences knew that Nedry’s day was done.
The artisans at Chronicle Collectibles pay homage to the work of those effects masters with their Jurassic Park 1/4-scale Dilophosaurus Statue. The creature’s curious expression is fully realized in one of the two heads included with the piece, which can be readily switched to the other to capture that signature look with the extended frills and screaming mouth. The Dilophosaurus Statue is limited to 300 pieces, with the first 100 sold including a Chronicle Collectibles exclusive — a Barbasol cryo-can in 1/4 scale.
Product Details:
- The Dilophosaurus Statue is crafted in hand painted poly-resin.
- 16" tall x 17.5" long x 12" deep.
- Switch out head for extended frill, open mouth display option. An additional small base styled like the paddock markers serves as a stand for either head when not displayed with the statue.
- Limited edition
- Chronicle Collectibles Exclusive: 1:4 scale Barbasol cryo can- limited to direct customers only
- Estimated to ship Q2 2020
- Price: $899.99 (eligible for no-interest payment plans)
- Published on
GAME OF THRONES: ICE DRAGON & THE NIGHT KING PREMIER STATUE
It’s finally here. Just ahead of the long-awaited final season of the tales of Westeros, comes the crown jewel of Dark Horse Direct’s initial offerings with the Ice Dragon and The Night King Premier Statue now open for pre-order.
Made from polyurethane and resin and sculpted by Bigshot Toyworks, this premier statue has been crafted with the utmost care and dedication to every detail, from the blue flame piece to the rips in the wings. As a bonus, we are including a separate figure of The Night King, standing poised with his deathly spear.
Freshly risen from the icy waters beyond the wall, Dark Horse has captured this unseen moment in all its detail with Viserion’s wings outstretched in ferocity, poised to decimate all that lay in his path. Looming at 24" tall, make this iconic statue the centerpiece of your collection.
WHAT’S INCLUDED
ADDITIONAL DETAILS AND DIMENSIONS
It’s finally here. Just ahead of the long-awaited final season of the tales of Westeros, comes the crown jewel of Dark Horse Direct’s initial offerings with the Ice Dragon and The Night King Premier Statue now open for pre-order.
Made from polyurethane and resin and sculpted by Bigshot Toyworks, this premier statue has been crafted with the utmost care and dedication to every detail, from the blue flame piece to the rips in the wings. As a bonus, we are including a separate figure of The Night King, standing poised with his deathly spear.
Freshly risen from the icy waters beyond the wall, Dark Horse has captured this unseen moment in all its detail with Viserion’s wings outstretched in ferocity, poised to decimate all that lay in his path. Looming at 24" tall, make this iconic statue the centerpiece of your collection.
WHAT’S INCLUDED
- Exclusive Ice Dragon Statue, apprx. 24" tall by 16" wide by 14" deep
- Features removable riding The Night King
- Also includes separate standing The Night King figure apprx. 2.5" tall
- Certificate of Authenticity
ADDITIONAL DETAILS AND DIMENSIONS
- Expected to Ship to Customers: October - December 2019
- Payment Plan Available - Click Pre-Order for Details
- Edition Size: Llimited to Pre-orders; Final Number TBD
- Materials: Polyurethane and Resin
- Sculptor: Bigshot Toyworks
- Painter: Ed Bradley
- Product Packaging Size: apprx. 26" H (660.40mm) x 22" W (558.80mm) x 11" L (279.40mm)
- Product + Packaging Dimensional Weight: apprx. 46 lbs.
- Item comes disassembled; some assembly required
- Price: 599.99
- Published on
The Japanese anime character Shin-chan (a 5 year old that acts like an adult) has his favorite toys one being Kaiju Shimadashi(?) a Godzilla like monster who's tail went missing Shin-chan decided to replace it with another toy's butt, yes you read that right. Now Bandai is releasing the toy in vinyl form, and it comes with a removable butt. It stands 16.5cm tall and will retail for 2,400 yen, it can be pre-ordered now from Bandai with release scheduled for Sept 2019.
- Published on
Chronicle Collectibles has announced The Lost World: Jurassic Park Parasaurolophus Statue, the first ever licensed from the film. Check out the details below and Pics.
The Lost World: Jurassic Park Parasaurolophus Statue
The strange looking Parasaurolophus is definitely one of our favorites at Chronicle and now we’re ready to bring this unique dino home for fans. Presenting the world’s first licensed Parasaurolophus statue from The Lost World: Jurassic Park, created from an original Stan Winston Studios casting! The pre-order fun begins tomorrow at 3pm CDT (8pm UTC) at chroniclecollectibles.com!
This next release in our line of cinema-quality maquettes honors the work of master FX artisan Stan Winston and his immeasurable contributions to the Jurassic Park franchise. With its tan body and reddish brown highlights on its back and face, this duck-billed dinosaur stands atop a sandy base reminiscent of the grounds of Isla Sorna where Roland Tembo pursued the Parasaurolophus herd. Individually numbered and measuring a sizeable 21” tall by 33” long, this dinosaur is destined to make a fantastic addition to your growing Jurassic Park and Jurassic World collection from Chronicle Collectibles!
Details:
• World’s First Officially Licensed Parasaurolophus Statue from The Lost World: Jurassic Park
• Limited Edition
• Crafted in Polyresin
• Diorama base with The Lost World: Jurassic Park logo medallion
• Approx. 21" tall, 33” long, and 11” wide
• Estimated to Ship Q2 2020
• Priced at just $499 (and eligible for our no-interest payment plans)
It's about time the Parasaurolophus received some high-end collectible love, and we're so proud to bring you this gorgeous piece starting at 3pm CDT tomorrow!
The Lost World: Jurassic Park Parasaurolophus Statue
The strange looking Parasaurolophus is definitely one of our favorites at Chronicle and now we’re ready to bring this unique dino home for fans. Presenting the world’s first licensed Parasaurolophus statue from The Lost World: Jurassic Park, created from an original Stan Winston Studios casting! The pre-order fun begins tomorrow at 3pm CDT (8pm UTC) at chroniclecollectibles.com!
This next release in our line of cinema-quality maquettes honors the work of master FX artisan Stan Winston and his immeasurable contributions to the Jurassic Park franchise. With its tan body and reddish brown highlights on its back and face, this duck-billed dinosaur stands atop a sandy base reminiscent of the grounds of Isla Sorna where Roland Tembo pursued the Parasaurolophus herd. Individually numbered and measuring a sizeable 21” tall by 33” long, this dinosaur is destined to make a fantastic addition to your growing Jurassic Park and Jurassic World collection from Chronicle Collectibles!
Details:
• World’s First Officially Licensed Parasaurolophus Statue from The Lost World: Jurassic Park
• Limited Edition
• Crafted in Polyresin
• Diorama base with The Lost World: Jurassic Park logo medallion
• Approx. 21" tall, 33” long, and 11” wide
• Estimated to Ship Q2 2020
• Priced at just $499 (and eligible for our no-interest payment plans)
It's about time the Parasaurolophus received some high-end collectible love, and we're so proud to bring you this gorgeous piece starting at 3pm CDT tomorrow!
- Published on
Master Replicas is releasing the Smithsonian Nation’s T-Rex Quarter, Half, & Full Scale Skull replicas, made from a direct scan of the actual T-rex fossil. Check out the details and info below.
SMITHSONIAN NATION'S T. REX SKULL REPLICA
Master Replicas is proud to announce that we have started development on our largest project yet. This new replica has been in development for literally millions of years!
We have worked over the last few months to produce 3D models from the Smithsonian’s T. rex skull scan-file for reproduction. These will be produced and sold as 1/4-scale, 1/2-scale, and full-size replicas. For reference, the full-size replica will come in at about 58 inches long.
The Nation’s T. rex skull replicas can be purchased with an optional display/support system. A name/data plaque is included. The skulls will be produced here in the USA and cast in extremely strong and durable resin, so each replica's weight will be surprisingly manageable. For example, the full-sized skull casting will come in at only about 40 pounds.
We think that any respectable recreation room or company lobby needs a full-size Nations’s T. rex skull on display! Now you can obtain an incredible replica that is fully authorized and sourced directly from the original Smithsonian asset. All three sizes should be available for shipment in April, 2019.
Full size
Approximately 58”
$9,500.00
Half scale
Approximately 29”
$3.750.00
Quarter scale
Approximately 16”
$795.00
All made of resin. Display stands sold separately. (All pics except the one below are of the quarter scale model.)
These can be purchase direct from Master Replicas or from select retailers like Sideshow Collectibles.
SMITHSONIAN NATION'S T. REX SKULL REPLICA
Master Replicas is proud to announce that we have started development on our largest project yet. This new replica has been in development for literally millions of years!
We have worked over the last few months to produce 3D models from the Smithsonian’s T. rex skull scan-file for reproduction. These will be produced and sold as 1/4-scale, 1/2-scale, and full-size replicas. For reference, the full-size replica will come in at about 58 inches long.
The Nation’s T. rex skull replicas can be purchased with an optional display/support system. A name/data plaque is included. The skulls will be produced here in the USA and cast in extremely strong and durable resin, so each replica's weight will be surprisingly manageable. For example, the full-sized skull casting will come in at only about 40 pounds.
We think that any respectable recreation room or company lobby needs a full-size Nations’s T. rex skull on display! Now you can obtain an incredible replica that is fully authorized and sourced directly from the original Smithsonian asset. All three sizes should be available for shipment in April, 2019.
Full size
Approximately 58”
$9,500.00
Half scale
Approximately 29”
$3.750.00
Quarter scale
Approximately 16”
$795.00
All made of resin. Display stands sold separately. (All pics except the one below are of the quarter scale model.)
These can be purchase direct from Master Replicas or from select retailers like Sideshow Collectibles.
- Published on
Enesco is releasing the T-Rex Bust Edge Sculpture Resin Statue, a unique style bust from their Edge Sculpture line. The awesome bust will be available direct from Enesco as well as retailers like Sideshow Collectibles. Check out the details and pics below.
T-Rex Bust Edge Sculpture Resin Statue
Enesco presents the T-Rex Bust Edge Sculpture. A new, striking collection of contemporary sculpture created by artist Matt Buckley. Approximately 19" tall, this bust shows the ferocious Tyrannosaurus Rex! Dinosaur enthusiasts, don't miss your chance to add this to your collection!
Colors: Green, White and Brown
Exquisitely Hand Painted
Handcrafted in stone resin
19.75 IN H x 12.25 IN L x 20.75 IN W
Retail price: $375.00
Release date: Aug 2019
Edge Sculpture® Ltd. 2019
T-Rex Bust Edge Sculpture Resin Statue
Enesco presents the T-Rex Bust Edge Sculpture. A new, striking collection of contemporary sculpture created by artist Matt Buckley. Approximately 19" tall, this bust shows the ferocious Tyrannosaurus Rex! Dinosaur enthusiasts, don't miss your chance to add this to your collection!
Colors: Green, White and Brown
Exquisitely Hand Painted
Handcrafted in stone resin
19.75 IN H x 12.25 IN L x 20.75 IN W
Retail price: $375.00
Release date: Aug 2019
Edge Sculpture® Ltd. 2019
- Published on
McFarlane Toys has officially announced their second Game Of Thrones dragon figure Drogon, the first being Viserion. Check out the details below from McFarlane Toys.
Along with his brothers Viserion and Rhaegal, Drogon was raised since birth by Daenerys Targaryen, and is also the Mother of Dragons’
personal mount. Named after Daenerys’s late husband Khal Drogo, Drogon is distinguished by his black and red colored scales, and redblack
wings.
PRODUCT FEATURES:
Incredibly detailed figure of Dragon as seen in HBO's critically acclaimed series Game of Thrones
Features bendable tail with movable legs, wings, and neck allowing for customizable posing
Drogon’s wingspan 13-inches wide and features up and down movement
Dragon measures 6-inches H x 13-inches W x 9-inches D when fully displayed on base
Figure is showcased in window box collector packaging
Price: $27.99
Release date: June 2019
Along with his brothers Viserion and Rhaegal, Drogon was raised since birth by Daenerys Targaryen, and is also the Mother of Dragons’
personal mount. Named after Daenerys’s late husband Khal Drogo, Drogon is distinguished by his black and red colored scales, and redblack
wings.
PRODUCT FEATURES:
Incredibly detailed figure of Dragon as seen in HBO's critically acclaimed series Game of Thrones
Features bendable tail with movable legs, wings, and neck allowing for customizable posing
Drogon’s wingspan 13-inches wide and features up and down movement
Dragon measures 6-inches H x 13-inches W x 9-inches D when fully displayed on base
Figure is showcased in window box collector packaging
Price: $27.99
Release date: June 2019
- Published on
Prime 1 Studio revealed a number of figures at Winter Wonder Festival 2019. They revealed Brachiosaurus from the 1/38 scale line, as will as Indominus Rex 1/15 scale figure, and Spinosaurus 1/15 scale figure. Brachiosaurus comes with a base like the other 1/38 scale figures, the 1/15 scale figures come with a diorama bases. All should be up for pre-order in the near future.
- Published on
Iron Studios has announced another awesome statue, the John Hammond Art Scale 1/10 Statue. The statue is basically the same pose as the one with The Welcome To Jurassic Park statue we posted yesterday just larger. Check out the details below.
Based on Michael Crichton's Jurassic Park book, Steven Spielberg's Universal Pictures film that kicked off the film franchise, was a landmark in theaters in 1993, winner in three categories at the 66th Oscars. The story features a theme park inhabited by extinct dinosaurs 65 million years ago, cloned from their DNA extracted from insects preserved in prehistoric amber. Created by John Hammond, an eccentric billionaire, the park located on an island near Costa Rica called Nublar, is analyzed by Hammond to win approval from a select group of experts formed by palaeontologist Dr. Alan Grant, his paleobotan student Ellie Sattler , the mathematician Ian Malcolm and Donald Gennaro, a lawyer representing Hammond's investors. Accompanied by children Tim and Lex Murphy,
Jurassic Park John Hammond Art Scale 1/10 Statue
Limited edition
Based on original references from the movie
Made in Polystone
Hand painted
Includes base display
John Hammond Art Scale 1/10
Product dimensions: 7.6 in (H) x 5.5 in (W) x 5.3 in (L)
Product Weight: 0.8 lbs
Release Schedule: Third quarter of 2019
Price: $99.99
Based on Michael Crichton's Jurassic Park book, Steven Spielberg's Universal Pictures film that kicked off the film franchise, was a landmark in theaters in 1993, winner in three categories at the 66th Oscars. The story features a theme park inhabited by extinct dinosaurs 65 million years ago, cloned from their DNA extracted from insects preserved in prehistoric amber. Created by John Hammond, an eccentric billionaire, the park located on an island near Costa Rica called Nublar, is analyzed by Hammond to win approval from a select group of experts formed by palaeontologist Dr. Alan Grant, his paleobotan student Ellie Sattler , the mathematician Ian Malcolm and Donald Gennaro, a lawyer representing Hammond's investors. Accompanied by children Tim and Lex Murphy,
Jurassic Park John Hammond Art Scale 1/10 Statue
Limited edition
Based on original references from the movie
Made in Polystone
Hand painted
Includes base display
John Hammond Art Scale 1/10
Product dimensions: 7.6 in (H) x 5.5 in (W) x 5.3 in (L)
Product Weight: 0.8 lbs
Release Schedule: Third quarter of 2019
Price: $99.99
- Published on
Iron Studios is releasing two Jurassic Park 1/20 Scale Demi Art Scale statues Welcome To Jurassic Park and Brachiosaurus. Both feature the same basic Brachiosaurus, while the Welcome To Jurassic Park adds Grant, Elie and Hammond, as seen in the classic scene from the film as well as a grass base with trees. Check out all the details below.
One of the best known and tallest (over nine meters high) dinosaurs, Brachiosaurus in Jurassic Park was recreated by InGen in its complex on Sorna Island, where islanders served as their caretakers. This colossal cloned dinosaur had back legs strong enough to allow them to enter a tripod position during feeding. When they reached a certain age, they were transported to the neighboring island, Nublar Island, to be one of InGen's Jurassic Park attractions. It was the first dinosaur found by staff hired by InGen to assess the safety of Jurassic Park for visitors. Dr. Alan Grant and Dr. Ellie Sattler were the most "haunted" of the group because the Brachiosaurus was a land dweller, not semi-aquatic as they thought.
Welcome to Jurassic Park Demi Art Scale 1/20 Diorama
Welcome to Jurassic Park!
1/20th scale diorama
Limited edition
Based on original references from the movie
Made in Polystone
Hand painted
Includes base with Brachiosaurus, Grant, Elie and Hammond
Welcome to Jurassic Park Demi Art Scale 1/20
Product dimensions: 31,5 in (H) x 23,6 in (W) x 12,2 in (L)
Product Weight: 25,3 lbs
Release Schedule: Third quarter of 2019
MSRP $999.99
Brachiosaurus Demi Art Scale 1/20
Brachiosaurus
Limited edition
Based on original references from the movie
Made in Polystone
Hand painted
Includes base display
Brachiosaurus Demi Art Scale 1/20
Product dimensions: 30,7 in (H) x 15,7 in (W) x 11,8 in (L)
Product Weight: 21 lbs
Release Schedule: Third quarter of 2019
MSRP $599.99
Welcome to Jurassic Park!
1/20th scale diorama
Limited edition
Based on original references from the movie
Made in Polystone
Hand painted
Includes base with Brachiosaurus, Grant, Elie and Hammond
Welcome to Jurassic Park Demi Art Scale 1/20
Product dimensions: 31,5 in (H) x 23,6 in (W) x 12,2 in (L)
Product Weight: 25,3 lbs
Release Schedule: Third quarter of 2019
MSRP $999.99
Brachiosaurus Demi Art Scale 1/20
Brachiosaurus
Limited edition
Based on original references from the movie
Made in Polystone
Hand painted
Includes base display
Brachiosaurus Demi Art Scale 1/20
Product dimensions: 30,7 in (H) x 15,7 in (W) x 11,8 in (L)
Product Weight: 21 lbs
Release Schedule: Third quarter of 2019
MSRP $599.99
