- Published on
Spiral Studio Hall Of Fame Series Godzilla 2024 Evolved Form Figure
Standing at an impressive height of 27cm, this meticulously crafted collectible showcases movie-accurate details that will delight fans and collectors alike.
This rendition of Godzilla features striking magenta dorsal fins, a formidable thagomizer, and menacing spikes spread across its entire body. The vibrant painting not only highlights the likeness of Godzilla in his evolved form but also adds a dynamic and lifelike quality to the figure.
To further enhance the realism of this iconic creature, the dorsal fins along Godzilla's back and tail are constructed using transparent materials, adding a unique touch that sets this figure apart. Prepare to own a piece that captures the essence and grandeur of the king of monsters in a truly stunning way.
Details
Standing at an impressive height of 27cm, this meticulously crafted collectible showcases movie-accurate details that will delight fans and collectors alike.
This rendition of Godzilla features striking magenta dorsal fins, a formidable thagomizer, and menacing spikes spread across its entire body. The vibrant painting not only highlights the likeness of Godzilla in his evolved form but also adds a dynamic and lifelike quality to the figure.
To further enhance the realism of this iconic creature, the dorsal fins along Godzilla's back and tail are constructed using transparent materials, adding a unique touch that sets this figure apart. Prepare to own a piece that captures the essence and grandeur of the king of monsters in a truly stunning way.
Details
- 3D Sculpt by Vlad Konstantinov
- Dimensions - H: 27cm/W: 18.4cm/L: 42cm
- Materials: Solid PVC and Transparent PVC
- Pre-order Starts: March 29th 2024
- Release: August 2024
- Edition Size: TBD
- Price: $189
- Available on www.spiral-studio.co only
- Published on
Spiral Studio is releasing the Mothra 2019 Imago Form Mystical Edition, with design and art by Yuji Kaida and Kenichi Tanaka. Check out the information below from Spiral Studio.
"Mothra, Queen of the Monsters" - Dr. Ilene Chen
Following the releases of King Ghidorah(2019) and Burning Godzilla(2019) under The Ultimate Masterline Series, here comes Queen of the Monsters herself.
Spiral Studio proudly presents ME-MIS005: Mothra(2019) Imago Form in all her glory with the level of details taken directly from the movie through the official assets.
Tanaka Kenichi-sensei returns again with his unparalleled craftmanship as seen in any other of his works. Mothra was sculpted with all the attention to details in mind, whether it be individual hairline, over a thousand lens on her eyes, wrinkles and hairs throughout the wings for instance. Combining with the diorama that faithfully depicts the cityscape of Boston's downtown, we aim to achieve an absolute realism with our works.
The same approach was also applied to our painting process as. we made sure that the most important parts of Mothra like her wings pattern is 100% accurate to the movie. We even used special type of Black Light Paint to imitate her bioluminescence effect where her wings' color changes and glows beautifully. With this technique, collectors get to have 2 different versions of Mothra in one statue.
As an icing on top, we are honored to announce that our Mothra Imago comes with an exclusive art print illustrated by none other than the legendary artist, Yuji Kaida-sensei, whose works are considered one of the best in Kaiju genre.
Mystical Edition also includes bonus item in a form of "Mothra Stone Tablet" which is a smaller replica of the stone wall inside Temple of the Moth located in Yunnan Province, China.
Pre-order Starts: June 12, 2023 - 3:00 P.M. (GMT+7, BKK Time)
Est. Arrival: Q2 2024
Dimensions: H 142 x L 60 x W 60 cm.
Materials: Poly Resin, Clear Resin, and PVC (on sensitive parts)
Sculptor: Tanaka Kenichi
Edition Size: 150 (each)
Price: $2,150.00 Mystical, $1,999.00 Standard
More info at: https://www.spiral-studio.co (available on pre-order date)
NOTICE & DISCLAIMER
・Product in the pictures is a prototype. The finished product may look different from the pictures.
・Product details could be subjected to change without prior notice.
・This product is limited in supply. We may stop accepting pre-order early if we receive the maximum number for the pre-order.
・Lighting used on promotional images are applied for illustration purposes only.
・Products are painted by hands. Each piece may slightly vary.
・Turntable was used for photoshoot only. Final product does not come with base, pedestal, or turntable.
©2023 Legendary. All Rights Reserved. TM&© TOHO CO.,LTD. MONSTERVERSE TM&© Legendar
"Mothra, Queen of the Monsters" - Dr. Ilene Chen
Following the releases of King Ghidorah(2019) and Burning Godzilla(2019) under The Ultimate Masterline Series, here comes Queen of the Monsters herself.
Spiral Studio proudly presents ME-MIS005: Mothra(2019) Imago Form in all her glory with the level of details taken directly from the movie through the official assets.
Tanaka Kenichi-sensei returns again with his unparalleled craftmanship as seen in any other of his works. Mothra was sculpted with all the attention to details in mind, whether it be individual hairline, over a thousand lens on her eyes, wrinkles and hairs throughout the wings for instance. Combining with the diorama that faithfully depicts the cityscape of Boston's downtown, we aim to achieve an absolute realism with our works.
The same approach was also applied to our painting process as. we made sure that the most important parts of Mothra like her wings pattern is 100% accurate to the movie. We even used special type of Black Light Paint to imitate her bioluminescence effect where her wings' color changes and glows beautifully. With this technique, collectors get to have 2 different versions of Mothra in one statue.
As an icing on top, we are honored to announce that our Mothra Imago comes with an exclusive art print illustrated by none other than the legendary artist, Yuji Kaida-sensei, whose works are considered one of the best in Kaiju genre.
Mystical Edition also includes bonus item in a form of "Mothra Stone Tablet" which is a smaller replica of the stone wall inside Temple of the Moth located in Yunnan Province, China.
Pre-order Starts: June 12, 2023 - 3:00 P.M. (GMT+7, BKK Time)
Est. Arrival: Q2 2024
Dimensions: H 142 x L 60 x W 60 cm.
Materials: Poly Resin, Clear Resin, and PVC (on sensitive parts)
Sculptor: Tanaka Kenichi
Edition Size: 150 (each)
Price: $2,150.00 Mystical, $1,999.00 Standard
More info at: https://www.spiral-studio.co (available on pre-order date)
NOTICE & DISCLAIMER
・Product in the pictures is a prototype. The finished product may look different from the pictures.
・Product details could be subjected to change without prior notice.
・This product is limited in supply. We may stop accepting pre-order early if we receive the maximum number for the pre-order.
・Lighting used on promotional images are applied for illustration purposes only.
・Products are painted by hands. Each piece may slightly vary.
・Turntable was used for photoshoot only. Final product does not come with base, pedestal, or turntable.
©2023 Legendary. All Rights Reserved. TM&© TOHO CO.,LTD. MONSTERVERSE TM&© Legendar
- Published on
TOTM-GZ006: Godzilla(2019) Atomic-charged Edition
"You're kidding me? Serizawa got that lizard juiced!."
- Rick Stanton
Spiral Studio is proud to present the fifth release from Titans of the Monsterverse, with king of the monsters himself.
TOTM-GZ006: Godzilla(2019) Atomic-charged Edition was sculpted and painted using real assets and references from the movie “Godzilla: King of the Monsters, with absolute accuracy.
Utilizing chrome and multiple layers of clear blue, teal, and dark blue colors, we aim to represent Godzilla charging energy just before his famous 'heat ray'(aka Atomic Breath) where collectors can play with the lighting however they want.
This release is exclusive to our authorized distributor, Creation At Works and its resellers like Kaiju Live, Speculative Fiction Collectibles, AwesomeCollector.com, and BigBadToyStore.
ORDER DETAILS
PRODUCT SPECIFICATIONS
Pre-order at:
NOTICE
"You're kidding me? Serizawa got that lizard juiced!."
- Rick Stanton
Spiral Studio is proud to present the fifth release from Titans of the Monsterverse, with king of the monsters himself.
TOTM-GZ006: Godzilla(2019) Atomic-charged Edition was sculpted and painted using real assets and references from the movie “Godzilla: King of the Monsters, with absolute accuracy.
Utilizing chrome and multiple layers of clear blue, teal, and dark blue colors, we aim to represent Godzilla charging energy just before his famous 'heat ray'(aka Atomic Breath) where collectors can play with the lighting however they want.
This release is exclusive to our authorized distributor, Creation At Works and its resellers like Kaiju Live, Speculative Fiction Collectibles, AwesomeCollector.com, and BigBadToyStore.
ORDER DETAILS
- Pre-order Starts: TBA at Creation At Works
- Est. Arrival: Q 1, 2024
- Edition Size: 150
- Price: $799.00
PRODUCT SPECIFICATIONS
- 3D Sculpt by Vlad Konstantinov
- Dimensions - H: 49 cm / W: 53 cm / L: 76 cm
- Materials: Vinyl and PU Resin
Pre-order at:
- www.creationatworks.com
- www.kaijulive.shop
- www.awesomecollector.com
- www.specfictionshop.com
- www.bigbadtoystore.com
NOTICE
- Product in the pictures is a prototype. The finished product may look different from the pictures.
- Product details could be subjected to change without prior notice.
- This product is limited in supply. We may stop accepting pre-order early if we receive the maximum number for the pre-order.
- We have also moved the release date of TOTM-GZ005: Godzilla(2019) to Q1 2024, like TOTM-GZ006: Godzilla(2019) Atomic-charged Edition
- Published on
"I advise you to kill all these things. All of them. Especially him." - Mark Russell
Spiral Studio is proud to present the fourth release from Titans of the Monsterverse, with king of the monsters himself.
TOTM-GZ005: Godzilla(2019) was sculpted and painted using real assets and references from the movie “Godzilla: King of the Monsters, with absolute accuracy.
ORDER DETAILS
Spiral Studio is proud to present the fourth release from Titans of the Monsterverse, with king of the monsters himself.
TOTM-GZ005: Godzilla(2019) was sculpted and painted using real assets and references from the movie “Godzilla: King of the Monsters, with absolute accuracy.
ORDER DETAILS
- Pre-order Starts: November, 2022 (Kaiju Live)
- Est. Arrival: Q2, 2024
- Edition Size: 399
- Price: $749
- 3D Sculpt by Vlad Konstantinov
- Dimensions - H: 49 cm / W: 53 cm / L: 76 cm
- Materials: Vinyl and PU Resin
- Product in the pictures is a prototype. The finished product may look different from the pictures.
- Product details could be subjected to change without prior notice.
- This product is limited in supply. We may stop accepting pre-order early if we receive the maximum number for the pre-order.
- Published on
TITANS OF THE MONSTERVERSE: TOTM-BH004: BEHEMOTH
Distribution: This product will only be available through our authorized US distributors;
"Since nearly all kaiju are usually giant reptiles, insects, or some hybrid, it was fun to come up with a new mammal that combined traits of woolly mammoths, apes, and giant sloths."
- Mike Dougherty
Spiral Studio is proud to present the third release from Titans of the Monsterverse, with the most beloved original Titan from Legendary Pictures, Titanus Behemoth.
TOTM-BH004: Behemoth was delicately sculpted by none other than Tanaka Kenichi(Tanaka Studio). Utilizing the official assets, we are delivering what was portrayed in the movie, no matter how small the details, with an aim of bringing about the most accurate depiction of Behemoth that one will ever see. Additionally, collectors will get to customize Behemoth using included DIY Foliage Kit* to enhance its realism even further.
Add Behemoth to your collection to complete your “Dawn of the Titans” scene or put him up against his rival, Amhuluk(coming soon) today!
*Rubber Adhesive recommended
Pre-order Starts: March 25, 2022 - 8:00 A.M. (PST)
Est. Arrival: Q 2-3, 2023
Edition Size: 399
Dimensions: H 40.5 x L 61 x W 32 cm.
Retail price: $569 (but varies by dealer)
NOTICE
・Product in the pictures is a prototype. The finished product may look different from the pictures.
・Product details could be subjected to change without prior notice.
・This product is limited in supply. We may stop accepting pre-order early if we receive the maximum number for the pre-order.
MONSTERVERSE TM & © 2022 Legendary. All Rights Reserved.
Photos at bottom are a prototype of a 40cm Godzilla to go with this line.
Distribution: This product will only be available through our authorized US distributors;
- Creation at Works (https://creationatworks.com/spiral-studio)
- Kaiju Live (https://www.kaijulive.shop/?Collection=SPIRAL+STUDIO) Preferred Retailer
- Awesome Collector (https://awesomecollector.com/collect…/godzilla/spiral-studio)
- Big Bad Toy Store (https://www.bigbadtoystore.com/Search?Company=1089)
- Open Vault Collectibles (https://openvaultcollectibles.com/collections/spiral-studios)
"Since nearly all kaiju are usually giant reptiles, insects, or some hybrid, it was fun to come up with a new mammal that combined traits of woolly mammoths, apes, and giant sloths."
- Mike Dougherty
Spiral Studio is proud to present the third release from Titans of the Monsterverse, with the most beloved original Titan from Legendary Pictures, Titanus Behemoth.
TOTM-BH004: Behemoth was delicately sculpted by none other than Tanaka Kenichi(Tanaka Studio). Utilizing the official assets, we are delivering what was portrayed in the movie, no matter how small the details, with an aim of bringing about the most accurate depiction of Behemoth that one will ever see. Additionally, collectors will get to customize Behemoth using included DIY Foliage Kit* to enhance its realism even further.
Add Behemoth to your collection to complete your “Dawn of the Titans” scene or put him up against his rival, Amhuluk(coming soon) today!
*Rubber Adhesive recommended
Pre-order Starts: March 25, 2022 - 8:00 A.M. (PST)
Est. Arrival: Q 2-3, 2023
Edition Size: 399
Dimensions: H 40.5 x L 61 x W 32 cm.
Retail price: $569 (but varies by dealer)
NOTICE
・Product in the pictures is a prototype. The finished product may look different from the pictures.
・Product details could be subjected to change without prior notice.
・This product is limited in supply. We may stop accepting pre-order early if we receive the maximum number for the pre-order.
MONSTERVERSE TM & © 2022 Legendary. All Rights Reserved.
Photos at bottom are a prototype of a 40cm Godzilla to go with this line.
- Published on
SPIRAL STUDIO TOTM-MT003: QUEEN MUTO
"This one is different and older than the MUTOs we saw before, hence the 'crown' of dorsal ridges to express her royal status."
- Mike Dougherty
Spiral Studio is proud to present the second release from Titans of the Monsterverse, with one of the most requested monster from the franchise, Queen MUTO.
TOTM-MT003: Queen MUTO was sculpted and painted using real assets and references from the licensors, with a priority being the movie-accurate details from the scenes in Godzilla: King of the Monsters.
Pre-order Starts: January 19, 2022 - 10:00 A.M. (PST)
Est. Arrival: Q4, 2022
Edition Size: MTO
Material: Vinyl and other materials
Size: 35cm tall, 28cm wide, and 52cm deep.
Price: $469.00
Distribution: This product will only be available through our authorized US distributors. Please make a purchase at;
- Creation at Works(https://creationatworks.com)
- Kaiju Live(https://www.kaijulive.shop)
- Awesome Collector(https://awesomecollector.com)
- Big Bad Toy Store(https://www.bigbadtoystore.com)
- Open Vault Collectibles(https://openvaultcollectibles.com)
NOTICE
・Product in the pictures is a prototype. The finished product may look different from the pictures.
・Product details could be subjected to change without prior notice.
・This product is limited in supply. We may stop accepting pre-order early if we receive the maximum number for the pre-order.
MONSTERVERSE TM & © 2022 Legendary. All Rights Reserved.
"This one is different and older than the MUTOs we saw before, hence the 'crown' of dorsal ridges to express her royal status."
- Mike Dougherty
Spiral Studio is proud to present the second release from Titans of the Monsterverse, with one of the most requested monster from the franchise, Queen MUTO.
TOTM-MT003: Queen MUTO was sculpted and painted using real assets and references from the licensors, with a priority being the movie-accurate details from the scenes in Godzilla: King of the Monsters.
Pre-order Starts: January 19, 2022 - 10:00 A.M. (PST)
Est. Arrival: Q4, 2022
Edition Size: MTO
Material: Vinyl and other materials
Size: 35cm tall, 28cm wide, and 52cm deep.
Price: $469.00
Distribution: This product will only be available through our authorized US distributors. Please make a purchase at;
- Creation at Works(https://creationatworks.com)
- Kaiju Live(https://www.kaijulive.shop)
- Awesome Collector(https://awesomecollector.com)
- Big Bad Toy Store(https://www.bigbadtoystore.com)
- Open Vault Collectibles(https://openvaultcollectibles.com)
NOTICE
・Product in the pictures is a prototype. The finished product may look different from the pictures.
・Product details could be subjected to change without prior notice.
・This product is limited in supply. We may stop accepting pre-order early if we receive the maximum number for the pre-order.
MONSTERVERSE TM & © 2022 Legendary. All Rights Reserved.
- Published on
"Meet Titanus Mosura, or as we like to call her...Mothra"
Introducing brand new product line from Spiral Studio, Titans of the Monsterverse will be presented to collectors in vinyl format, with a much beloved Queen of the Monsters in her Larva form being the first of the series.
TOTM-ML002: Mothra Larva(Defensive Form) is sculpted by Tanaka Kenichi of Tanaka Studio, using real assets and references from the licensors, with a priority being the movie-accurate details from the iconic scene in Godzilla: King of the Monsters.
Pre-order Starts: September 17, 2021 - 4:30 P.M. (GMT+7) at www.spiraltoy.com
Pre-order Ends: September 30, 2021 - 00:00 P.M. (GMT+7)
Est. Arrival: Q 2, 2022
Edition Size: 500 Units
PRODUCT SPECIFICATIONS
・3D Sculpt by Tanaka Kenichi(タナカ・STUDIO)
・Dimensions - H: 37 cm / W: 23 cm / L: 42 cm
・Materials: Translucent Vinyl
NOTICE
・Product in the pictures is a prototype. The finished product may look different from the pictures.
・Product details could be subjected to change without prior notice.
・This product is limited in supply. We may stop accepting pre-order early if we receive the maximum number for the pre-order.
©2021 Legendary. All Rights Reserved. TM&© TOHO CO.,LTD. MONSTERVERSE TM&© Legendary
Introducing brand new product line from Spiral Studio, Titans of the Monsterverse will be presented to collectors in vinyl format, with a much beloved Queen of the Monsters in her Larva form being the first of the series.
TOTM-ML002: Mothra Larva(Defensive Form) is sculpted by Tanaka Kenichi of Tanaka Studio, using real assets and references from the licensors, with a priority being the movie-accurate details from the iconic scene in Godzilla: King of the Monsters.
Pre-order Starts: September 17, 2021 - 4:30 P.M. (GMT+7) at www.spiraltoy.com
Pre-order Ends: September 30, 2021 - 00:00 P.M. (GMT+7)
Est. Arrival: Q 2, 2022
Edition Size: 500 Units
PRODUCT SPECIFICATIONS
・3D Sculpt by Tanaka Kenichi(タナカ・STUDIO)
・Dimensions - H: 37 cm / W: 23 cm / L: 42 cm
・Materials: Translucent Vinyl
NOTICE
・Product in the pictures is a prototype. The finished product may look different from the pictures.
・Product details could be subjected to change without prior notice.
・This product is limited in supply. We may stop accepting pre-order early if we receive the maximum number for the pre-order.
©2021 Legendary. All Rights Reserved. TM&© TOHO CO.,LTD. MONSTERVERSE TM&© Legendary
- Published on
Spiral Studios has revealed their first completed figure in the Titans of the Monsterverse line, Mothra Larva Benevolent Version. As you may tell from the name there will be a second version, the "Angry Version" (previous prototype shown here). This figure is big, the bottom photo is it next to the Gigantic X-Plus Godzilla figure, it is 35cm scale (height), the design is a collaboration with Tanaka Studio as Spiral has done before. Full details below, thank Spiral Studio, Ash Siri, and Aj Russo.
"Meet Titanus Mosura, or as we like to call her...Mothra"
Introducing brand new product line from Spiral Studio, Titans of the Monsterverse will be presented to collectors in vinyl format, with a much beloved Queen of the Monsters in her Larva form being the first of the series.
TOTM-ML001: Mothra Larva(Benevolent Form) is sculpted by Tanaka Kenichi of Tanaka Studio, using real assets and references from the licensors, with a priority being the movie-accurate details from the iconic scene in Godzilla: King of the Monsters.
Pre-order Starts: September 17, 2021 - 10:00 A.M. (GMT+7) at www.spiraltoy.com
Pre-order Ends: September 30, 2021 - 00:00 P.M. (GMT+7)
Est. Arrival: Q 2, 2022
Edition Size: 500 Units
PRODUCT SPECIFICATIONS
・3D Sculpt by Tanaka Kenichi(タナカ・STUDIO)
・Dimensions - H: 35 cm / W: 23 cm / L: 42 cm
・Materials: Translucent Vinyl
NOTICE
・Product in the pictures is a prototype. The finished product may look different from the pictures.
・Product details could be subjected to change without prior notice.
・This product is limited in supply. We may stop accepting pre-order early if we receive the maximum number for the pre-order.
©2021 Legendary. All Rights Reserved. TM&© TOHO CO.,LTD. MONSTERVERSE TM&© Legendary
"Meet Titanus Mosura, or as we like to call her...Mothra"
Introducing brand new product line from Spiral Studio, Titans of the Monsterverse will be presented to collectors in vinyl format, with a much beloved Queen of the Monsters in her Larva form being the first of the series.
TOTM-ML001: Mothra Larva(Benevolent Form) is sculpted by Tanaka Kenichi of Tanaka Studio, using real assets and references from the licensors, with a priority being the movie-accurate details from the iconic scene in Godzilla: King of the Monsters.
Pre-order Starts: September 17, 2021 - 10:00 A.M. (GMT+7) at www.spiraltoy.com
Pre-order Ends: September 30, 2021 - 00:00 P.M. (GMT+7)
Est. Arrival: Q 2, 2022
Edition Size: 500 Units
PRODUCT SPECIFICATIONS
・3D Sculpt by Tanaka Kenichi(タナカ・STUDIO)
・Dimensions - H: 35 cm / W: 23 cm / L: 42 cm
・Materials: Translucent Vinyl
NOTICE
・Product in the pictures is a prototype. The finished product may look different from the pictures.
・Product details could be subjected to change without prior notice.
・This product is limited in supply. We may stop accepting pre-order early if we receive the maximum number for the pre-order.
©2021 Legendary. All Rights Reserved. TM&© TOHO CO.,LTD. MONSTERVERSE TM&© Legendary
- Published on
Spiral Studios has impress in the short time they have been around with King Ghidorah 2019 and Burning Godzilla 2019. Both of those figures are huge and for the super serious collector but now Spiral has announced the Titans Of The Monsterverse Collection 35cm line, with the Mothra Larva prototype. This figure, like Godzilla 2019, is designed by Tanaka Studio/Kenichi Tanaka who has released amazing statues in his own right. While we don't have the exact specs yet but if the 35cm scale is true to firm this will be upwards of twelve inches tall or maybe more. Check out some new images we received below and we will update as we get more info.
- Published on
Spiral Studios has announced their DX-BGS004: Burning Godzilla Deluxe Edition and ST-BGS003: Burning Godzilla Standard Edition, both which will be available for pre-order soon, now we are taking a closer look at the deluxe version. As with the standard version these shots of the deluxe lets us see the incredible detail of this figure both in its light up state as well as in it non light up state. We will let these pics speak for themselves but will say being able to see work in progress pics they wanted to get this figure to be as close to perfect as was possible and the results speak for themselves. We want to thank Spiral Studios for these awesome pics. Full details below as well as the Kaiju Live interview with Matt Frank on this figure.
"Long Live the King"
Through Serizawa's and Mothra's self-sacrifice, Godzilla has reached his most lethal state; Burning Form to battle against King Ghidorah once and for all.
Spiral Studio proudly presents the second release of Ultimate Masterline: Battle in Boston Series - Burning Godzilla Deluxe Edition(DX-BGS004).
Burning Godzilla is sculpted and painted with an aim to stay true to the details portrayed in the actual film.
With Thermonuclear Pulse Effect made with translucent material as a complementary item to represent Mothra's energy in one of the most iconic scene in the history of Godzilla's movies, Burning Godzilla Statue Deluxe Edition offers something that is unique in its entirety. Additionally, entire Burning Godzilla Statue and Diorama are fully equipped with LED light-up functions with a goal of presenting movie-accurate details in mind, in order to truly depict the iconic shot of the final battle in Godzilla: King of the Monsters.
Pre-order Starts: January 27, 2020 - 3:00 P.M. (GMT+7) at www.spiraltoy.com
Pre-order Ends: February 28, 2020 - 00:00 P.M. (GMT+7)
Est. Arrival: Q 1, 2022
Edition Size: 250 Units
Retail price: $1999.00 (Standard version retail price is $1099)
PRODUCT SPECIFICATIONS
・Concept Design by Matt Frank
・3D Sculpt by Tanaka Kenichi(タナカ・STUDIO)
・Dimensions - H: 105.2 cm / W: 101.1 cm / L: 96.2 cm
・Materials: Translucent Resin, Translucent Vinyl, and Polystone
・Shipping Weight: TBA
WHAT'S IN THE BOX?
・Burning Godzilla Statue
・Tail Stand
・Diorama
・Thermonuclear Pulse Effect(Detachable)
・Burning Godzilla Exclusive Art Print illustrated by Matt Frank
NOTICE
・Product in the pictures is a prototype. The finished product may look different from the pictures.
・Product details could be subjected to change without prior notice.
・This product is limited in supply. We may stop accepting pre-order early if we receive the maximum number for the pre-order.
*Available to customers in USA and its territories only
**Burning Godzilla can be displayed separately without base/thermonuclear pulse effect.
©2021 Legendary. All Rights Reserved. TM&© TOHO CO.,LTD. MONSTERVERSE TM&© Legendary
"Long Live the King"
Through Serizawa's and Mothra's self-sacrifice, Godzilla has reached his most lethal state; Burning Form to battle against King Ghidorah once and for all.
Spiral Studio proudly presents the second release of Ultimate Masterline: Battle in Boston Series - Burning Godzilla Deluxe Edition(DX-BGS004).
Burning Godzilla is sculpted and painted with an aim to stay true to the details portrayed in the actual film.
With Thermonuclear Pulse Effect made with translucent material as a complementary item to represent Mothra's energy in one of the most iconic scene in the history of Godzilla's movies, Burning Godzilla Statue Deluxe Edition offers something that is unique in its entirety. Additionally, entire Burning Godzilla Statue and Diorama are fully equipped with LED light-up functions with a goal of presenting movie-accurate details in mind, in order to truly depict the iconic shot of the final battle in Godzilla: King of the Monsters.
Pre-order Starts: January 27, 2020 - 3:00 P.M. (GMT+7) at www.spiraltoy.com
Pre-order Ends: February 28, 2020 - 00:00 P.M. (GMT+7)
Est. Arrival: Q 1, 2022
Edition Size: 250 Units
Retail price: $1999.00 (Standard version retail price is $1099)
PRODUCT SPECIFICATIONS
・Concept Design by Matt Frank
・3D Sculpt by Tanaka Kenichi(タナカ・STUDIO)
・Dimensions - H: 105.2 cm / W: 101.1 cm / L: 96.2 cm
・Materials: Translucent Resin, Translucent Vinyl, and Polystone
・Shipping Weight: TBA
WHAT'S IN THE BOX?
・Burning Godzilla Statue
・Tail Stand
・Diorama
・Thermonuclear Pulse Effect(Detachable)
・Burning Godzilla Exclusive Art Print illustrated by Matt Frank
NOTICE
・Product in the pictures is a prototype. The finished product may look different from the pictures.
・Product details could be subjected to change without prior notice.
・This product is limited in supply. We may stop accepting pre-order early if we receive the maximum number for the pre-order.
*Available to customers in USA and its territories only
**Burning Godzilla can be displayed separately without base/thermonuclear pulse effect.
©2021 Legendary. All Rights Reserved. TM&© TOHO CO.,LTD. MONSTERVERSE TM&© Legendary
